Product Portfolio*Electrical and Mechanical Data
RANGE :Standard Energy Efficient 3 Phase SQ. Cage Induction motorswith rating 0.37 Kw to 22 Kw are available from frame sizes 71to 200 with standard speed 2 Pole, 4 Pole & 6 Pole.
STANDARDS :Performance conforms to IS 12615:2011 & IS/IEC 60034-1 anddimensions according to IS : 1231 and IS : 2223
RATINGS :Motors are rated for continuous duty type S1 at an ambientof 400 Deg. C and site altitudes of upto 1000 M above meansea level.VOLTAGE AND FREQUENCY :Motors designed are for a rated voltage of 415V +/-10%, 50 Hz+/-5% supply.
VOLTAGE AND FREQUENCY :Motors designed are for a rated voltage of 415V +/-10%, 50 Hz+/-5% supply.
PAINT :Standard synthetic enamel paint is provided which is suitablefor tropical conditions. However, special paint can be providedon request.
INSULATION SYSTEM :All standard motors are provided with class “F” insulationsystem.
DEGREE OF PROTECTION :Motors have lP55 degree of protection as a standard featureconforming to IS/IEC 60034-5.
TERMINAL BOX :All motors are provided with terminal box on the top frontas seen from the drive end or on the side of the motor body.Terminal box can be rotated in steps of 90 deg.
COOLING & VENTILATION :Type of cooling is as per IS 6362 & IEC 60034-6. All motors havean external bi-directional centrifugal fan.
NOISE :Motors are designed for low noise level in accordance with IS12065.
BEARING SYSTEM :All motors are equipped with pre-lubricated bearings.Regreasing facility can be provided on request.
EARTHING TERMINALS :Terminals are provided in all the motors. Two on the statorhousing and one in T. Box.
APPLICATION :Air Compressor, Pumps, Textile Machinery, PharmaceuticalMachinery, Chemical Machinery, Machine Tools, Crane andHoists, Blowers, Material Handling Equipments, Geared Motors.
CONSTRUCTION :Standard motors with single shaft extension are for horizontalfoot mounting *(B3 as per IS : 1231) and vertical flange / facemounting (B5 & B14 as per IS : 2223). Other types of constructionas shown below can be offered on request.
MATERIAL OF CONSTRUCTION :All standard motors are in Cast Iron material. Motors up to 100Lframe can be offered in Aluminum body.TYPES